WA SV Infinity help

[Eckhorn]

Hey I am trying to put together my WA SV infinity. I basically need to know if I am missing any parts and how to put it back together.





I will gladly take requests for pictures, any help is greatly appreciated thanks!

[the4thpower3]

I don't see a firing pin.
I assume the plungers are in place since the thumb safeties are on, but the first pic is out of focus there. So I can't tell if your plungers are in.. and if not... the plate for the left side inner portion of the frame (ie. plunger holder)

[Eckhorn]

Please excuse the crappy pictures, but my camera USP port is fried so I am using my phone's camera. Those plungers are there.


Currently.


Basically my symptoms are I get to shoot it once when I pull the hammer back, but it doesn't shoot...right...There is something wrong with the hammer/beaver tail area of the gun.

[the4thpower3]

Oh, you trying to diagnose a problem. Sorry I thought you were asking if anything looked like it was missing.....or was I missing something?

[Eckhorn]

Well both actually I have a problem, and I wasn't sure if any parts were missing. This is my first time taking apart the lower half. I am assuming I am either missing something or I am assembling incorrectly.

[wwjkc]

can i see a pic with the leaf spring installed?

probably the leaf spring is install wrong so it won't fire

[Eckhorn]

Hope that helps!

[wwjkc]

actually, take a pic with the lower frame on it would be better

I am in SD right now, sorry

wait wait, i found this one in my old file, the leaf spring should be install this way (the one on the right hand side)

[Eckhorn]

The hammer strut sit in that brass circle in my pic?

The hammer does not click back into place, and the beavertail doesn't seem to return or it returns weakly.

[wwjkc]

yeah, the strut goes in the middle of that brass circle

let me see a pic of the sear and the disconnector