Threaded Mode | Linear Mode

hkssr20det · 08-21-2007, 07:58 PM

SVI Expert SCW2/3

[Image: dsc01613zs1.jpg]

TM Kimber

TM STI Custom

[Image: sti1ll2.jpg]

Sachiel9051 · 08-21-2007, 08:27 PM

SVI Hybrid
[Image: DSC_0922.jpg]

SVI Limcat
[Image: DSC_0637.jpg]

hkssr20det · 09-02-2007, 10:35 PM

Beginning of the new Hi Capa Project:

[Image: tmhicapa60startjw5.jpg]

hkssr20det · 09-11-2007, 03:28 PM

TM Kimber TLE/RL II

[Image: tmtle1ca9.jpg]

hkssr20det · 09-15-2007, 04:02 AM

Hi Capa 6.0. 90% Done.

[Image: hicapa601jo7.jpg]

allizard · 09-20-2007, 10:19 PM

Finally started the 4.3 project. Just installed the TK grip on the 4.3 and man I love the new grip. Unfortunately I broke a tab when turning the mag catch. It's still work but I'll be looking for a replacement. Hey Ben you got any spare one around?!

[Image: IMG_8963-vi.jpg]

I'll swap out the slide with the springfield slide pretty soon.

hkssr20det · 09-20-2007, 11:55 PM

Which part? I have the big metal part spare, but not the little twisting arm inside (which I am pretty sure is the part you need).

Looks good man, does it fit a Serpa now?

allizard · 09-21-2007, 01:52 AM

It's done.. well almost... the slide is tight fit and would use some sanding. At least I got it to cycle. I think I'm going to upgrade the springs as well

[Image: IMG_8966-vi.jpg]

really boring on the left side now.

[Image: IMG_8974-vi.jpg]

Ben.. remember you where selling the low profile mag catch? That's what I need now. Even the original one.

hkssr20det · 09-21-2007, 02:02 AM

Ummm, I have the stock one somewhere. Let me check it out and I will let you know. I no longer have a Nine Ball one. I think the 4.3 stock one is lower than the 5.1 so you probably have the same thing as I do. I'll take a picture of it next to something we both have so you can figure out if the one I have is lower.

hkssr20det · 09-24-2007, 04:12 PM

New bits and pieces, about 75% done, but all the major work is done.

[Image: stippled1ep9.jpg]