Traders Airsoft Forums

TOP M60E3 (custom renovation field-worthy gun)

Version 3 automatic fire only gearbox (mix of VFC/Marui/G&P & DBoys parts)
AK hop-up mechanism
Ares re-wired auto-feeding box mag (feeds and fires when trigger is pulled)
VFC E4 bi-pod
VFC metal rear sight
VFC metal carry handle
TOP metal front gas tube
low resistance wiring installed
replaced all screw/bolts with round-head hex hardware
custom made rear gas tube & connector (allows much more strength and support of upper barrel assembly)
completely refinished exterior with industrial based ultra flat black
custom made SAW sling (made from a TAG H-Harness adjustable shoulder strap)
11.1V 1600 MAH Li-Po battery under top cover and another separate 7.4V 4000 MAH Li-Po placed underneath (for changing ROF modes in the field)

I've got to here....
TH M240B
basically stock except for a prommy tbb (which if you get one of these I highly recommend upgrading the barrel, stock, it's accuracy leaves a lot to be desired.....) and redone box mag (cardboard is used for realism, but that doesn't hold up for heavy usage (or bad weather), so I made one of similar dimensions as the inner cardboard, except using plastic and hot glue, works just fine actually.






and just to give you an idea of the size of it.....
I am (6' 0", btw)

New project gun: Custom-built HK21E. Not spot-on, but close enough. Still missing a few components, but I'm not gonna bother with the internals. Once I raise the money, this puppy's going off to Daytonagun for a GBB conversion.




Oh and the verti-... horizontal? Anyway, the foregrip's getting replaced with my Knight's Armament-trademarked one, because it's less shiny..

Inokatsu M60E3 ($700 on ebay! Whoo!!)

Whoa great price.... And good looking.


George

Indeed! Was just poking around ebay and stumbled across it. Thought the guy had a reserve price on it or something but no, that was the price! He got paid, I got an Ino, everyone's happy!