Traders Airsoft Forums

Full Version: Cleaning out (GHK AK74, TM 5-7, CA870, HK69, stuff)
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2
I need to get rid of stuff badly. Too many guns.
Ground rules, prices are OBO, paypal is ok, prices include shipping unless stated otherwise. Trades will be considered, I'm very whimsical, which is why I have these in the first place.

GHK AK74u x2
Used once, then sat home collecting dust while I used my KJW M4 everywhere.
(from old seller)
[Image: img2749r.jpg]
(my picture)
[Image: IMG_0374-1.jpg]
I also have 8 mags (not pictured)

So, AK without tape is upgraded with RA-tech parts
-RA-Tech Steel bolt carrier
-RA-Tech Aluminum Hop-up
-Madbull shark hopup rubber and H nub
-Madbull V2 tightbore
-Real steel AK74 black pistol grip
-Refinished handguards
It is ready to go!
I will let it go for $340 with 4 mags. Great deal Aiwebs_011

The AK with tape is a little bit stock and boring, plus the handguard pin is missing, I'd rather sell the good one first, but if you really want. That one will be $290 with 4 mags. Silencer NOT included, I do have the original flashhider.

Next
[Image: DSC01069.jpg]
TM 5-7 wtih one extra mag.
Got two of them the day it came out. Fired it once, didn't like it, sold one already, now I'm selling the second one. No orange or putty ever touched the gun, it is in pristine shape. The spare magazine is still in it's original wrapping, you can kind of spot it in the edge of the picture.
$210 for the package

Maruzen CA870 package
[Image: IMG_0399.jpg]
[Image: IMG_0398.jpg]
The picture pretty much says it all. This is an old gun, something that's been sitting around forever, I used to have 5 of these. They are almost history now that third parties stopped making kits like long barrel or stocks for it anymore. The long barrel kit is extremely rare now (inb4 Chinese clones). Though thankfully you can still mod real steel stocks to fit. Which is the full stock on there right now.
These are single shot "shotguns", just think of them as shooting slugs, and by "shotgun" I really mean sniper rifle. They take APS2 springs, I'll just leave it as that.
$170 shipped for the whole package, and up to 4, 40 round mags, I've got like 20 of these mags I think. I'll even throw in a random bag of goodies like screws and small parts you might need.
Or, lets say if you only want the full stock but short barrel, then I can mix and match and give you a lower price. Up to you.
There are 3 bodies, one plastic blank one, one plastic one with maruzen trades, and one metal with Remington trades, unfortunately the trades were partially blurred out for customs.
Oh, the short one is a parts gun I can throw in for free, missing internals, but you could just swap parts and basically have two configurations.
Oh again, the rail that looks suspiciously like the *suitcasey* plastic UTG one is in fact not *suitcasey* and is made of metal.
This is really OBO, I kind of need the money, and this is taking up too much space :/

Partial *AS IS* CAW HK69 and some random bungee 1pt sling I found
[Image: IMG_0395.jpg]
Not much to say, HK69 was a project piece I picked up, but I'm too lazy to finish it now, it's currently missing the trigger mech. Well, not missing, but one of the pieces broke, so I have all the pieces, but one of them is broken. Would look awesome on a kit even if it's not finished.
The sling is just some random thing I found
Sling - $10 (Or $5 if you buy over $50, and free over $100)
HK69 - $42

LULZ ARMY OF TWO MASK
[Image: IMG_0397.jpg]
Long story, never been used, you know you want it, BUY IT
$45

Again, prices are OBO, and will post more things later. Thanks.

EDIT:
adding

CYMA SOCOM16
[Image: IMG_0375-1.jpg]
Picture from last owner
[Image: P1020647.jpg]
Sling and optic NOT included

Here are a list of work put into it
"All stock wiring replaced with 16 awg PTFE wire and deans connectors.
Prometheus 200% torque gears
Classic army extreme motor
Guarder SP120 Spring
Guarder anti-friction cut off lever
Guarder Cylinder head
Guarder cylinder
Guarder tappet plate
Guarder bearing spring guide
Prometheus hard piston
G&G bearing piston head
Prometheus air nozzle
Firefly soft hop bucking

External:
CYMA M14 RIS
Guarder bipod stud
King Arms sight mount base
Star 412mm outer barrel with CCW threads (Original barrel assembly included)"
All this for $140

Again, prices are very OBO and don't be afraid to offer trades.
Pming you about 5-7
Vainguard, I know donut personally and have fired that 5-7 seven myself, if you're still looking for a 5-7, your search should end here, it's in pristine condition, he's babied that thing like no other. With the care he's put into it, it should be better than buying a stock one. And the no orange part is a great plus!

Hey Donut, JX2 bro!
Lol.. Yeah I'm just looking for the best deal I can find since I'll be revamping it anyways... I had an offer for one with a serpa and 2 mags bnib for $160 but then he sold it out from under me... I wonder why he even bothered offering it to me if he was just going to sell it the next day?

Anyways, we'll see what happens, if we can come to an agreeable deal then sure I'll take it.
PM replied, and forgot to add, the SOCOM16 comes with a 9.6v nimh battery
I'll take the 69...please PM me payment n shipping info
Shotgun Package now $160
Sling now free with any purchase

If you would like to buy the AK individually
Upgraded AK $240
Stock AK $200
Mags $35 each

Of course, if you buy a lot of mags, I will give discounts.
Whole package both AK's for only $620 shipped
I will even throw in a chicom
Would you consider parting the short barrel kit for the CA870? (proving it's metal and not the stock one of course) I've been looking for a metal shortbarrel kit for mine.
Check your PM inbox dude!
Ok, announcement, since everyone is more interested in a broken HK69 than a GBB AK. Anyways, I lied, I thought I had all the pieces in the bag, but I must have left the broken piece out when I was working on it. Sorry.
I'll try to find it, but if not, I'll see if I can make a CAD or a model of it. Or just finally stop being lazy and fix it :/
Here are all the other pieces
[Image: IMG_0381.jpg]
I've assembled most of the rest
[Image: IMG_0382-1.jpg]
[Image: IMG_0389-2.jpg]
The only thing left is the broken push bar. Which is like a "Y" shaped bar that just pushes the hammer. Since right now pulling the trigger does nothing.

Adding, upgraded CYMA AK gearbox (Motor tabs need to be re-soldered, yes, I am that lazy)
[Image: IMG_0379-1.jpg]
[Image: IMG_0380.jpg]
$25 shipped

And price drop on the 5-7
$180 shipped and will include a deepfire "V" GBB/VSR10 bucking.
Pages: 1 2
Reference URL's